DELO Standard Lead/Acid Motorcycle Battery YB3L-A 12V/3AH

Note: Remember to order your battery acid and either a funnel or battery acid dispenser at the same time as the battery. Typically you will need 2 bottles of acid to fill one battery. Please check the volume of your battery before ordering. Important Note: Always check before filling/installation that the battery will fit your bike. Put your old battery next to the new one to ensure they have the same dimensions and the terminals are in the same position. Also ensure the voltage (V) and the capacity (Ah) match.

Motorrad News 01/2007 Germany's Leading Motorcycle News Review

MOTORRAD NEWS Verdict:
"10 out of 10 points in both, the cold start and the performance recovery tests!"

Motorrad News analysis:
"The best results in our comparative tests and the great value price are the strengths of the DELO battery. Like all batteries, the standard lead-acid construction needs regular charging during the winter break. Our BEST BUY recommendation is well deserved for its amazing performance!"

Altogether 9 motorcycle batteries were compared in the tests including among others examples from brands such as Varta, Yuasa, Odyssey, Exide and AWS. All batteries tested fit in the standard battery holder of BMW motorcycle models such as the K 1100 RS and the R 1150 GS.

WHAT WE TESTED: "To ensure that the starting position of all batteries was comparable, each battery was connected for 8 hours to an intelligent motorcycle battery charger. The model used was the SAITO ProCharger which is suitable for and adapts to all battery types appropriately. Then we left them for a night, so that the batteries could lose their surface charge, which is normally distinctly higher than the underlying actual charge and consequently has no meaning in everyday use. After that relaxation period, we first measured (following the E-Norm) and documented the cold start voltage with a specialist gauge (Bosch BAT 121). Our first test result!
24 hours later, the detailed test continued. For the performance test we connected to every battery a load of 300W (heating mats) and measured the voltage after 15 minutes and 30 minutes. This establishes at what rate the battery dispenses its power and discharges itself.
Having been worn down by this loading test, we reconnected the batteries to the SAITO ProCharger and measured the voltage after 15 and 30 minutes. This documents how well and quickly the battery recovers in ideal conditions after having experience a heavy pull on its power reserves."