- Ultra-lightweight construction reduces bulk & weight
- Charger included
- Built in USB port to charge your phone
- Weighs 270g
- Comes with a neoprene belt to store the battery
- Max output of 6.5 Amps
- Built in USB-port to charge a navigation system or phone
- LED-indicator shows how much power is left in the batteries.
- Approximately 5 hours battery life
The 5.2 Amps Lithium Polymer 12 can be connected to Gerbing's heated clothing which doesn't draw more than 6.5 amps (one heated jacket). The latest version of the B12V-5200.
The battery has a 3 level setting for regulating the heat. If you want to, you can use the remote control, which you can hang to your keys. The battery's life is guaranteed for hundreds of charging cycles.
To connect the heated gloves to the B12V-5200 battery, you will need a long Y-cable. This Y-cable is a standard item with the 12 volt heated socks. The Junior controller which comes with every pair of 12 volt gloves will not work on this particular battery.
The battery will only work when connected to a heated product. When you put the plug of the heated garment in the battery, push the up button for around 2 seconds. You will then see the digit 1, 2 or 3 appear. This is your power setting. After approximately 3 seconds the digit will change into 1-9 which shows how much power is left inside the battery.
The battery can be used for the following heated products:
G-12 Hybrid Heated Gloves.
XR-12 Hybrid Heated Gloves
T-12 Hybrid Heated Gloves.
L-12 Heated Glove Liners.
TEX-12 Heated Textile Gloves.
12 Volt Electric Heated Socks.
12 Volt Heated Jacket Liner.
12 Volt Heated Trouser Liner.
CAUTION! To extend the battery life you should charge the batteries to maintain their hold, even if the batteries are not being used. You should recharge them at any time to a minimum of 25%, even in the summer months. Charge the batteries once a month!
Note: This battery cannot be used in combination with a Junior Controller or a single or dual temperature controller!