|
|
| Motorcycle Oil Filters |
| Regular oil and filter changes are an an essential part of engine care. The GetGeared motorcycle oil filter range delivers unbeatable value, premium components. The DELO and CHAMPION brands are built for maximum filtration in the high oil pressure environments of modern engines. |
 |
• OEM premier quality performance filters |
| • More than 20 years experience |
| • Premium German and Japanese filter paper |
| • Designed for high performance engines |
|
 |
• High performance oil filters |
| • Galvinised anti-corrosion components |
| • Embossed paper for maximum filtration |
| • Suppliers to Ducati race teams |
|
| GetGeared Recommends |
| SELF CENTERING OIL FILTER KEY |
 |
Change oil filters fast.
Get the right grip every time. |
|
|
| GetGeared Recommends |
| USED OIL DRAINING CAN |
 |
Drain and dispose of
used oil with ease. |
|
|
| GetGeared Recommends |
| MOTO-DETAIL OIL TEMP GAUGES |
 |
Protect your engine.
Check your oil temperature. |
|
| |
| Motorcycle Oil Filters in a Nutshell |
Safety note: To remove/fit motorcycle oil filters requires technical know- GetGeared recommends that motorcycle oil filters are only exchanged by a competent mechanic!
THE BASICS ABOUT MOTORCYCLE Oil Filters
Clean Healthy Engines: Oil filters are all about engine protection. The quality of the oil you put in and the quality of the oil filter you use will make a difference to the life of your engine.
Not all oil filters are made equal, however their job is to trap and hold foreign particles that become suspended in the oil. If left unfiltered these tiny particles can damage engine parts such as pistons and bearings that are set to very fine clearances of 1 thousandth of an inch, leading to premature engine wear.
Safety Features - By-Pass Valves: Oil filters should have a by-pass valve which triggers if the filter element creates a large drop in pressure. When this happens the oil is not being filtered as it goes around the filter element. This can happen because a low grade oil is being used or when starting up on a very cold day and the oil is still cold (see MOTO DETAIL Oil Temperature Gauges). But mostly this will be an indicator that the filter is saturated with waste and needs replacing.
Safety Features - Anti-Drain Back Valve: Most motorcycles have oil filters mounted horizontally. The anti-drain valve is normally a piece of nitrile or silicon rubber that blocks the filter inlet unless there is positive pressure. This prevents the oil in the filter draining back into the engine, bringing with it a load of nasty engine damaging particles.
When to change your oil & oil filter? It depends how much mileage you are doing. However in our experience low grade oil and poor quality oil filters are false economies and shorten the service intervals and the life of your engine.
Always use an advanced synthetic or semi-synthetic oil in your modern sports bike or high quality mineral oil in your Harley and older classic bikes combined with a good quality oil filter. Your owner's manual provides details of the required oil changes for your bike.
However, common sense says that an oil change is a low cost, quick maintenance task that can be done easily by anyone with even a little mechanical understanding. We recommend you change the oil filter with every oil change which is likely to be at every service, large or small, or once every 6 months. Oil filters must be changed no later than at every major service interval (usually every 5,000 - 8,000 miles) or at least once a year.
|
|
|
|
|
|
