| |   | | SAITO Motorcycle Heated Grips Set 2 |
• Ultimate comfort heated grips for arctic conditions
• Three heat settings
• Includes Quick-Start heat setting
• All parts required for simple fitting
• Spray protected switch housing
• Grippy rubber for good control everyday
Quick View
SAITO heated motorcycle grips for 22mm handlebars and bikes with 12V on-board electrics and battery power of 6amps or more. Simple to fit, three heat settings help you adjust to any weather. And the grippy surface gives you control whether it's warm or cold.
The Techy Stuff
For 22mm handlebars
Requires onboard electrics of 12V and a minimum of 6Ah battery power
Splash proof switch housing
Switch mounted on handlebars
Circuit fuse-protected
Grip ends can be cut open for fitment of handlebar end indicators etc
Power consumption 10W (Low setting), 20W (High setting) and 40W (Start setting)
Note: Vehicle electrics require good technical know-how. If you are in doubt about your knowledge to complete the job, GetGeared recommends the grips are best fitted by a professional mechanic
Before fitting: Please download the fitting instructions from the link on this page. If the motorcycle grips are not fitted directly to the battery the use of a relay is recommended (Item Code 10032035)
Also Worth A Look
SAITO motorcycle heated grips
Fitting relay for connection to the on board electrics rather than the battery
Procycle Brake Cleaner to remove old grips
BGS 24mm spanner to remove old grips
Self-welding rubber insulation tape |
|
