• Fix tubeless flat tyres in seconds• Easy storage• Fits via the air valve
How to fix a motorcycle puncture. When you get a puncture in your motorcycle or car tyre, whether you're in the middle of nowhere or at the side of a road, there isn't much that can be done so you end up stranded and standing at a busy roadside is very dangerous. For a quick fix that will get you to a garage or tyre fitter, use a can of Holt's Tyreweld. A compact solution in a can that can be stored under your bike seat or in a pannier, Tyreweld reinflates your tyre and then seals the puncture so that you can ride to safety. You won't need tools or the knowledge of motorcycle wheel removal, simply follow the instructions on the can and you're good to go.
Peace of mind under your seat. The can takes the place of a whole kit with lots of different parts and procedures. The water-based foam acts like a tyre sealant and finds the puncture as you start riding, sealing it for you to safely get to a repair shop. Tyreweld is very easy to use because of its unique "twist and go" mechanism and gets to work in minutes so you spend less time on the roadside.
Quick instructions: After removing the source of the puncture (if you can), shake the can and affix the connector to the tyre valve. Remove the security tab and twist the red button to the ON position. Step back and wait about two minutes for the can to completely empty.
Note: For the best seal, ride for six to ten extra miles at a maximum speed of 30mph after inflation.
Only for tubeless tyres.
PLEASE NOTE: We are unable to ship aerosols and liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.
• Fix flat tyre in seconds
• Saves cost on recovery
• Seal the puncture
• Fits via the air valve
• Easy storage
PLEASE NOTE: We are unable to ship aerosols & liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.