Constructed of lightweight stretch material, these heated inner gloves are ideal for keeping your hands warm while wearing your favourite gloves in any weather! Although thin, they require a bit of room in your gloves to ensure they fit in. They come complete with all you need to power from your bike, 12v Vehicle or Li-ion battery. (Li-on Battery extra).The latest X6 vest incorporates integrated power sockets specifically to power Keis heated inner gloves. To facilitate this connection requires two glove connection leads.
SAFETY & ENVIRONMENT FIRST Do not dispose of electrical equipment with standard domestic waste. Contact your local authority for information specific to your area. WARNING This electrically heated garment must be used strictly in accordance with the manufacturer's instructions. Failure to observe this notice may lead to increased risk of burns & fire resulting in injury or death Switch the garment off immediately & check the affected skin at any sign of irritation or sensation of excessive heat Never leave the garment unattended when switched on This product is unsuitable for young children Do not use this product if you suffer from: heightened or impaired temperature Sensitivity; an inability to sense temperature extremes; circulatory problems resulting from diabetes or other medical conditions When operating with batteries use only the appropriate Keis Battery Pack & Charger When operating using a vehicle battery ONLY use this product with 12V systems Ensure replacement fuses are rated at 5A ONLY Do not modify or disassemble any part of the system in any way Do not use if the product is visibly damaged TECHNICAL DATA Material: 86% Polyester, 14% Spandex Maximum current draw: 1.4A @ 13.8V Approximate maximum temperature: Approximate maximum temperature: 50 _C PREPARING A VEHICLE TO POWER YOUR KEIS HEATED GLOVESIf powering your Keis Garment from a vehicle battery attach the fused connection lead directly to the battery or other live 12v source taking into account any safety notices issued by the vehicle manufacturer & observing the polarity Red +ve & Black -ve. Position the power socket so it is in a convenient position to power your garment & secure if necessary using cable ties or tape ensuring that it cannot interfere with the normal operation of the vehicle. Alternatively you can power your Keis Heated Garment from a 12v Cigarette Lighter/Accessory Socket. PREPARING THE GLOVES SUPPLY LOOMThread the Glove Supply Loom through your jacket with one plug positioned at the end of each arm & one protruding from the left hand side of the jacket at the waist. If you use the gloves on a regular basis consider using thread to tack the Glove Supply Loom into the lining of the jacket. Note: The Glove Supply Loom has one lead shorter lead for the left arm! POWERING YOUR KEIS HEATED UNDERGLOVES FROM A VEHICLE POWER SOURCE Your Keis Heated Undergloves can be powered directly from the Fused Connection Lead or Cigarette Lighter/Accessory Plug as above by simply connecting & disconnecting as required For more control we recommend the use of the On/Off Switch Pt. No. W54-SWITCH or Heat Controller Pt. No. W54-CONT. POWERING YOUR KEIS HEATED UNDERGLOVES FROM A KEIS POWER PACK Your Keis Heated Undergloves can also be operated on portable battery packs with an integral heat controller. POWERING YOUR KEIS HEATED UNDERGLOVES FROM THE KEIS HEATED BODYWARMER Later models of Keis Heated Bodywarmer have dedicated supply sockets for the Heated Undergloves which means you can share the same power source as the Bodywarmer. To use this feature obtain two 600mm extension leads CARE OF YOUR KEIS HEATED UNDERGLOVES If necessary hand wash at 30 _C & drip dry only do not tumble dry or wring Do not bleach Do not operate until completely dry + _ Fused Connection Lead Glove Supply Lead