Interest FREE with Klarna.
Midland BTX1 Intercom Rider-to-Pillion Set 10m
The Midland BTX1 headset kit is designed to be fitted directly on to your and your pillion's helmet for chatting between the two of you, GPS instructions for the rider and music for both. If it is about the two of you, your music and being reachable, this is the kit for you. Connects to your Bluetooth-enabled GPS or phone. The unit has a socket for a wired connection that can be used to connect an iPod/MP3 player or PMR446 transceiver, which will then enable bike-to-bike communications up to a maximum range of 5 km. Note for all devices like this: Before using the headset for the first time, remember to recharge it for at least 4 hours.
Not suitable for bike-to-bike communication.
MIDLAND BTX1 - Rider-to-Pillion option
Two stereo speakers, microphone with boom & wire microphone
Plate with bi-adhesive strip to fix the unit onto the helmet
Or: Use the provided clamp to fix the unit onto the helmet
1 x mini USB wall-mounting power supply
Wind Suppressing Foam Microphone Cover, Allen key & Velcro strip for assembly
The units are already paired & to be used immediately in the Intercom mode
Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP protocol)
AGC system automatically controls the volume in relation to background noise
Voice (VOX) or manual communications option
Private or shared (3-way communications) call mode
Manual controls to enable: telephone, intercom & wire connection
Lithium battery with 8 hours talk time (up to 2 days in standby mode)
Recharge time: app. 4 hours
Dimensions. Length: 87 mm _ Width: 47 mm - Thickness:16 mm
Bluetooth connections: Driver's device:- With pillion's unit, in Intercom mode Driver-Pillion
With Mobile phone, GPS (Garmin Zumo & TomTom Rider 1 & 2)
With pillion's device:- Only with the driver's unit in Intercom mode Driver-Pillion
Wire connections for both units: stereo audio input (iPod/MP3 player)
For PMR446 transceivers (with optional cable)
Attention: before using BTX1 for the first time, remember to recharge it for at least 4 hours.
Waterproof - Attention: Midland BTX1 is designed to withstand rain & water. However, if it is raining, always verify that the rubber caps protecting the sockets are fully fitted
This product is CE marked according to the RTTE Directive (99/5/EC) & is free use in all the EU countries
Users are not permitted to make any changes or modifications to the device