Interest FREE with Klarna.
Nikwax TX Direct Wash-In 300ml
Recommended by Gore-Tex!
Use Nikwax to waterproof and maintain all bike clothing and accessories. Stay dry! This waterproofer simply washes in in the rinse of the washing cycle - best used with NIKWAX Tech Wash Cleaner in the main cycle!
PLEASE NOTE: We are unable to ship aerosols and liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.
For best results remove all non-washable parts & always clean item(s) first with Nikwax Tech Wash in a separate wash cycle. No need to dry item(s) before waterproofing.
Shake well before use. Follow care label instructions.
Remove all detergent build-up from the detergent dispenser. Place maximum of 2 clean garments in washing machine. Use 2 full caps (100ml) per garment. Run 30o synthetic cycle & slow spin. Do not machine wash garments if taped seams have become dislodged.*
Hand Wash (use gloves):
Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink. Add 1 full cap (50ml) of TX. Direct. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly. Rinse with cold water until water runs clear.
Drying: Air dry. To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents.
Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing & drying.
PLEASE NOTE: We are unable to ship aerosols & liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.
Keeps you dryAfter washing your outer gear and gloves with the Nikwax cleaner, just measure out the amount, put into your machine and bobs your uncle.
Leave the gear to drip dry and their all water proofed. Great product but you tend to use twice as much of this than the cleaner so order 2 to 1 to keep stocked up.